|
VIP-804-KMV-DE 4 port KVM Switch |
|
Description: The VIP-804 "MegaSwitch"™
KVM Switch allows one keyboard, mouse and monitor to control
up to four PCs. It is the ideal solution for KVM switch applications
requiring access to as many as four
computers, without the clutter
and expense of additional keyboards, mice and monitors. The VIP-804
supports all popular keyboards and mice, including Microsoft
IntelliMouse™, and video resolution of 1600 by 1200 at 75Hz. All
Vetra KVM Switches are designed and manufactured in the USAfor use around the world for
enterprise mission-critical applications and are backed by a
Limited 3-year Warranty. For more information on this product
or our complete line of KVM solutions, please contact us at sales@vetra.com All VIP-804 "MegaSwitch"
KVM Switch models can select the active PC via a keyboard "hot-key"
sequence ( [scroll lock] + [1] for PC1, or [scroll lock] + [3]
for PC3, etc ) or by a push button(s) located on the front panel
of the KVM Switch. |
Features:
|
Other Vetra Products KVM Switches Dual-Head KVM Switches Touch Screen Products Video Products KVM Splitters KVM Extenders Keyboard Encoders Keyboard & Mouse Port Terminators Protocol Converters Foot-operated Devices Accessories |
VIP-804-KMV 4 port KVM Switch |
Models:All VIP-804 "MegaSwitch"
KVM Switch models can select the active PC via keyboard "hot-key"
sequence. Direct
Entry
models
(as indicated by -DE) have an individual
push button switch for each selectable PC channel, while non-DE
models have a single push button (NEXT PC) that switches sequentially
through the connected PCs. Dual-Head KVM Switch and Multi-Head KVM Switch models available. VIP-804-KMV: 4 port KVM Switch. Switch one keyboard,
mouse and monitor between four PCs. PC selection via keyboard
"hot-key", or sequentially via "NEXT PC"
push-button. You will need four of our VIP-305-KVM-06 combo cables to connect to the PCs. Or you may use eight 6-pin mini-DIN male-male cables, such as our VIP-300-6MM-06 cables, and four HDD15 video cables to connect to the PCs. VIP-804-KMV-DE: 4 port KVM Switch. Switch one keyboard,
mouse and monitor between four PCs. PC selection via keyboard
"hot-key", auto-scan, or direct entry front panel switches. You will need four of our VIP-305-KVM-06 combo cables to connect to the PCs. Or you may use eight 6-pin mini-DIN male-male cables, such as our VIP-300-6MM-06 cables, and four HDD15 video cables to connect to the PCs. All prices are
subject to change without notice. |
Connections:Standard male-male extension
cables are used to connect the MegaSwitch to the keyboard and
mouse ports of the PC's, and standard HDD15 Male-female video
cables are used to connect to the video ports of PC's. Using
standard cables eliminates the need to replace an entire multi-port
cable if one connection is damaged or fails, thereby reducing
the overall cost of maintainence. You may use your cables, or
ours (see Accessories ). The captive
cables that are part of the keyboard, mouse, and monitor are
used to connect these devices to the MegaSwitch. Dimensions for all models of
the VIP-804 KVM Switch are 2.63 in H x 8.08 in W
x 6.32 in D (6.68 cm x 20.52 cm x 16.05 cm). The housing is molded
of black GE Cycolac-T, a high impact ABS material, and is internally
shielded with an acrylic base nickel coating for RFI attenuation.
Front and rear panels are fabricated from .062 in thick aluminium
and finished with low gloss paint. All VIP-804 KVM switch models
are powered from the connected PC's keyboard and mouse ports,
so no external power supply is required. FCC and CE marked. Shipping
weight is less than 3 lbs per unit. Supported Hardware MegaSwitch is a trademark of Vetra Systems Corporation Copyright © 1995 - 2003 by Vetra Systems Corporation All Rights Reserved |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
275 Marcus Blvd. Ste-J Hauppauge, NY 11788-2022 USA Toll Free 1-800-537-9296 Tel: 631-434-3185 Fax: 631-434-3516 e-mail: sales@vetra.com |